A high-end renovation in Marvin produces a particular kind of mess. The finishes are exceptional. The workmanship is meticulous. And when the last contractor walks off the job, there is frequently a staging area full of debris that nobody agreed to haul away — old cabinetry stacked in the garage, tile backer scattered across the driveway, flooring underlayment rolled up in a corner, fixtures that were replaced before they finished their useful life. Getting your home back means clearing all of it, and that requires a haul that can handle both volume and weight in the same trip.
This guide covers what contractors typically leave behind after a luxury renovation, how to coordinate debris removal around your project timeline, how light and dense materials are priced differently, and what we haul versus what requires specialty disposal. Visit our Marvin service page for full service details.
What Contractors Leave Behind
Even on well-managed renovation projects, debris accumulates in places the general contractor did not specifically contract to clear. Common post-renovation debris on Marvin properties includes:
- Demolished kitchen cabinetry — both upper and lower runs, often still partially assembled
- Old countertops — granite, quartz, laminate — which are heavy and awkward to move
- Removed flooring: hardwood planks, tile with mortar backing, luxury vinyl, carpet with padding
- Drywall scraps, backer board cutoffs, and insulation pieces
- Old light fixtures, plumbing fixtures, and hardware
- Casing, trim, and millwork removed during the scope expansion
- Appliances being replaced — ranges, dishwashers, refrigerators, wine coolers
- Outdoor renovation debris: old pavers, stone, retaining wall block, landscape edging
- Packaging material: crates, foam, cardboard from high-end fixtures and appliances
On whole-home renovations, the total volume can exceed a full 17-cubic-yard truck load. For kitchen and bath scopes, a half to three-quarter load is typical.
Coordinating Around the Project Timeline
Renovation cleanouts work best when they are scheduled in alignment with the project — not as an afterthought. There are two natural points in most projects where a cleanout makes sense:
Mid-project demo cleanout: After demolition is complete but before finish work begins. Hauling the demo debris creates clear workspace for the next trades and keeps the property from feeling overwhelmed. This is especially useful on large Marvin homes where demo debris from a kitchen or bath can pile up fast.
Final punch-list cleanout: After the last contractor finishes, before furniture is moved back in. This is the cleanout most homeowners think of — sweeping up everything that accumulated over the project duration and restoring the property to a condition you can actually live in.
Light vs Dense Materials: How Pricing Works
Our standard pricing is volume-based: we charge based on how much of our 17-cubic-yard truck your debris occupies. This works well for most renovation cleanouts involving drywall scraps, cabinetry, light fixtures, flooring, and packaging material. Here is the volume-based scale:
- 1/4 truck — $249
- 1/2 truck — $399
- 3/4 truck — $549
- Full truck — $699
Dense materials — tile with mortar backing, stone countertops, brick, concrete, roofing shingles — are priced by weight rather than volume. Dense debris is significantly heavier per cubic foot than standard construction waste. If your load is primarily dense material, we will quote it based on estimated weight rather than trying to apply a volume-based price that would not reflect the actual disposal cost.
Mixed loads are common: a Marvin kitchen renovation often produces both light debris (cabinetry, flooring, packaging) and dense debris (granite countertops, tile). We will quote each component clearly when you describe or photograph the load.
What We Haul vs Specialty Disposal
We haul the large majority of post-renovation debris — cabinetry, flooring, fixtures, appliances, tile, drywall, light framing materials, packaging, and mixed construction waste. Items that require specialty handling outside our scope include:
- Hazardous materials — asbestos-containing materials (common in older Marvin homes), lead paint debris, chemical solvents, and similar materials require licensed abatement contractors, not a junk haul.
- Refrigerants — HVAC equipment with active refrigerant charge requires proper recovery by a licensed technician before we can haul the unit.
- Large concrete pours or structural demolition — Demolition of concrete foundations, slabs, or large structural elements requires specialized equipment and is outside standard junk removal scope.
If you are uncertain whether something on your list falls into a specialty category, call us and describe it. We would rather tell you upfront than have either of us surprised on the job day.
Getting Your Quote
Text a photo of the debris area to (980) 446-2900. A wide-angle shot that shows the volume and the type of material is usually enough to quote accurately. If you have heavy material — countertops, tile — include a close-up. We respond the same day and can typically schedule within 24–48 hours. For active job sites with contractor coordination, call us directly to discuss timing.