Hot tub removal looks straightforward until you are standing next to a 900-pound shell that is bolted into a deck, wired into a dedicated 240-volt circuit, and accessible only through a side-yard gate that may or may not fit a hand truck. In Marvin, where luxury properties frequently include multiple outdoor amenity structures, hot tub and pool equipment removal is one of the more involved jobs we handle — and one where preparation on the front end makes a meaningful difference.
This guide covers what makes these jobs complicated, what you need to do before we arrive, and how County Junk Removal handles the process from start to finish. See our Marvin service page for a full overview of what we haul in this area.
Why Hot Tub Removal Is More Complex Than It Looks
A standard hot tub weighs between 500 and 1,000 pounds empty. A filled tub can exceed 5,000 pounds. Even fully drained, the acrylic shell, foam insulation, wood frame or synthetic cabinet, mechanical systems, and plumbing fittings create a bulky, awkward load that cannot simply be lifted and carried out the way furniture can.
The complications compound on luxury properties:
- Deck integration — Many Marvin hot tubs are built into custom decking. Removing the tub without damaging surrounding deck structure requires careful disassembly and awareness of how the tub is anchored.
- Electrical disconnect — Hot tubs run on dedicated 240-volt GFCI-protected circuits. This wiring must be properly disconnected by a licensed electrician before removal. That is not our scope — it is yours, and it needs to happen before we arrive.
- Gate and access clearances — Large Marvin properties often have side-yard gates designed for aesthetics rather than equipment passage. A 7-foot wide tub cannot fit through a 4-foot gate. We assess access in advance so we can plan the route — through the yard, around the structure, or in some cases over a fence section that can be temporarily removed.
- Weight on finished surfaces — Moving a hot tub across a patio, hardscape, or lawn requires careful staging to avoid cracking pavers, compressing turf, or damaging irrigation systems. We work with this in mind.
Pool Equipment Removal
Pool houses, pump houses, and outdoor equipment pads are common on larger Marvin properties. When pools are being decommissioned, renovated, or filled in, or when aging equipment is being replaced, the associated mechanical infrastructure — pumps, filters, heaters, aging plumbing runs, pump enclosures — needs to be hauled away.
Pool equipment contains refrigerants, oils, and other materials that require proper disposal. We handle the haul of the physical equipment to licensed disposal facilities. Anything involving active plumbing or electrical disconnection of pool systems should be handled by your pool contractor or a licensed plumber before we arrive for removal.
What to Do Before We Arrive
Getting these steps done before we show up keeps the job clean and avoids delays:
- Drain the hot tub completely. We cannot haul a tub with water in it. Run the drain hose to an appropriate discharge point well in advance and confirm it is fully empty.
- Have the electrical disconnected by a licensed electrician. The circuit breaker must be locked out and the wiring safely capped or removed from the equipment junction box. Do not leave live wiring connected at the tub panel. This is a safety and liability requirement — we will not proceed without it.
- Identify the access route. Walk the path from the tub to the street and note any constraints: gate width, step height, overhead clearances, surface type. Share this with us when you schedule so we can plan accordingly.
- Clear the area around the tub. Remove any furniture, planters, loose decking, or other items within a few feet of the tub to give us working room.
How We Handle the Removal
We arrive with the appropriate equipment to break down and haul the tub. Depending on size and access, this may involve cutting the shell into manageable sections or removing it in one piece. We do not cut corners on the method just to move faster — if a tub needs to come out in pieces to protect the surrounding deck, that is how we do it.
Once the tub is loaded into our 17-cubic-yard Isuzu NPR dump truck, we haul it to an appropriate facility. We clean up the work area before we leave.
Pricing Context
Hot tub removal is typically priced as a 1/4 to 1/2 truck load depending on the size of the tub and any associated equipment being hauled at the same time. Our pricing is all-in — labor, truck, and disposal included:
- 1/4 truck — $249
- 1/2 truck — $399
If you are bundling hot tub removal with other items — old patio furniture, pool accessories, landscaping debris — that can be loaded in the same trip and may affect the load tier. Text a photo of everything being hauled to (980) 446-2900 and we will quote it accurately before we show up.
A Note for Marvin Homeowners
Hot tubs in Marvin are often being removed as part of a larger renovation — a backyard redesign, a pool house update, a property being prepared for sale. In those contexts, timing matters. We work within your project schedule, coordinate with your contractor or landscape team if needed, and handle our portion of the job without adding friction to an active project.
Call or text (980) 446-2900 to discuss your specific situation. If you have photos, send them. We will confirm what we need from you before we arrive and give you a clear price before the job starts.